How to connect Blue-tooth Hands Free adapter to FMB device

From Wiki Knowledge Base | Teltonika
This is the approved revision of this page, as well as being the most recent.
Jump to: navigation, search
Main Page > Fleet management > Fleet management FAQ > How to connect Blue-tooth Hands Free adapter to FMB device

How to connect Blue-tooth Hands Free adapter to FMB device[edit]

Solution applies for these FM devices[edit]

FMB900 FMB920 FMB001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB202 FMB204 FMB962 FMB964 FMB640 FMT100 TMT250

Blue-tooth settings
Incoming Call Action settings under SMS/Call Settings

Blue-tooth settings configuration[edit]

These are instructions on how to easily create a connection between a Blue-tooth Hands Free device and FMB device. First the FMB device Blue-tooth settings need to be configured. These are the required steps:

  • Press Blue-tooth settings (position 1).
  • Turn on BT Radio by pressing Enable (visible) (position 2). Local name (position 3) will be "FMB1YX_last 7 imei digits" by default, which can be changed.
  • Set Security Mode (position 4) to PIN only or None. PIN + MAC list or MAC list only security modes could also be selected, but in that case external device MAC address is required to be entered to Authorized Devices MAC List (position 7).
  • Set connection mode to Hands Free (position 5).
  • Set External Name (position 6) as your hands-free device name for proper identification. In the given example hands-free headset name is "DMH10" but at least 2 characters are required to recognize it and connect to it. For better and quicker adapter identification on the network you could enter a full device name. You could check your hands-free adapter Blue-tooth name by scanning nearby Blue-tooth devices using a mobile phone or a computer with Blue-tooth adapter.
  • Go to SMS/Call Settings in main menu and set Incoming Call Action to Do Nothing as shown on next figure.
  • After all these steps press Save to device to save configuration.
  • Now FMB device can be disconnected from the configurator.

Connecting Blue-tooth Hands Free adapter[edit]

Turn on hands-free device and then turn on its Blue-tooth connection for pairing following your model instructions. Hands-free adapter should make a specific sound in the speakers or its LED identification should inform about a successful connection. To check if the adapter is successfully connected, dial the FMB device phone number and the hands-free device should start ringing. If you later restart FMB device it will automatically reconnect to this adapter.