MSP500 First Start

From Wiki Knowledge Base | Teltonika
Qsg rut950 teltonika.PNG


MSP500 is a special tracking terminal contains an integrated buzzer and a relay for a speed limiting functionality based on a fuel pump power supply switching.

MSP500 device.jpg




How to insert Micro-SIM card[edit | edit source]

  1. Gently remove MSP500 cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Connect battery as shown to device.
  4. After configuration, attach device cover back.

MSP500 CASE 1.pngMSP500 CASE 2.png
MSP500 CASE 3.pngMSP500 CASE 4.png


Alert.png
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.