RMS - Monitoring menu

From Wiki Knowledge Base | Teltonika
Main Page > Network products > RMS > RMS Manual > RMS - Management tab > RMS - Monitoring menu

Summary[edit | edit source]

The Monitoring menu located in the Management tab is used to set up parameter update intervals for the registered devices. This can be used to optimize the monitoring process and to reduce monthly data usages for devices registered on your RMS profile. This section of the RMS user manual provides an overview of the Monitoring top control menu.

Set update period[edit | edit source]

The Set update period provides the possibility to configure custom time intervals at which router parameter values are updated in the RMS.

To change monitoring options for your device go to the RMS web page, Left sidebar panel (Management → Overview) and click on Overview submenu.

Move your mouse pointer to the top control Monitoring menu and select Set update period (Monitoring → Set update period).


RMS Monitoring Set Update Period.gif


Step by step instructions[edit | edit source]

  1. First, choose a device(s) for which the configuration will apply.
  2. Move your mouse pointer to the Monitoring top control menu and click "Set update period".
  3. After a new pop-up window should appear. Place check marks next to relevant parameters to set up custom monitoring intervals. On the right you can set up the monitoring update frequency; on the left, you can set the time units for that frequency.
  4. As you change these settings, an estimated monthly data usage value will be calculated below in real time.

At the top of your screen, you will get a notification in green text: Device updated.

RMS-top-control-menu-device-updated.jpg

  • Dynamic Monitoring - every varying router parameter (e.g., uptime, mobile uptime, modem temperature, etc.).
  • Static Monitoring - every static router parameter (e.g., product code, batch number, hardware revision, etc.).
  • Hotspot Monitoring - Hotspot related parameters (Hotspot SSID, Hotspot IP address, Users online).
  • GPS Monitoring - GPS related parameters (e.g., longitude, latitude, altitude, GPS fix status, time, etc.).
  • Input/Output Monitoring - Input/Output related parameters (states of inputs and outputs).

Estimated monthly data usage[edit | edit source]


Estimated data usage calculates an estimate of monthly data usage based on the update period values specified above.


RMS Monitoring Data.gif