maintenance
IMPORTANT NOTICE: SCHEDULED MAINTENANCE AT 2020-02-19 6:00 AM GMT

Changes

Template:Networking rutx manual routing

608 bytes added, 19:11, 4 December 2019
<tr>
<td>Enable</td>
<td>yes off | noon; Default: '''nooff'''</td>
<td>Toggles the BGP instance ON or OFF</td>
</tr>
<tr>
<td>AS</td>
<td>integer; Default: " "</td>
<td>AS number is an identification of an autonomous system. BGP protocol uses the AS number for detecting whether the BGP connection is an internal one or external one. '''[Required]'''</td>
</tr>
<tr>
<td>BGP router ID</td>
<td>stringinteger; Default: " "</td>
<td>The router id is used by BGP to identify the routing device from which a packet originated. Default router ID value is selected as the largest IP Address of the interface.</td>
</tr>
<tr>
<td>Network</td>
<td>stringinteger; Default: " "</td>
<td>Add an announcement network(s)</td>
</tr><tr><td>Redistribution options</td><td>Default: " "</td><td>'''Route redistribution''' is a process that allows a network to use a '''routing''' protocol to dynamically '''route''' traffic based on information learned from a different '''routing''' protocol. Available options: <li>'''Connected routes'''</li><li><b>Kernel added routes</b></li><li><b>NHRP routes</b></li><li><b>OSPF routes</b></li><li><b>Static routes</b></li><li><b>Custom</b></li></td></tr><tr><td>Deterministic</td><td>off | on; Default: '''off'''</td><td>Compare MED between same AS ignoring their age</td></tr></table>
====BGP Peers====
<tr>
<td>Enable</td>
<td>yes off | noon; Default: '''nooff'''</td>
<td>Toggles the BGP peer ON or OFF</td>
</tr>
<tr>
<td>Remote address</td>
<td>ipIP; Default: " "</td>
<td>Neighbour's remote IPv4 address</td>
</tr>
<tr>
<td>Enable</td>
<td>yes off | noon; Default: '''nooff'''</td>
<td>Toggles the Access filter ON or OFF</td>
</tr>
<tr>
<td>Network</td>
<td>Any | ipcustom (IP); Default: '''Any'''</td>
<td>Applies filter rule for this source network</td>
</tr>

Navigation menu