TFT100 Bluetooth settings

From Wiki Knowledge Base | Teltonika
This is the approved revision of this page, as well as being the most recent.
Main Page > Smart Autonomous Solutions > TFT100 > TFT100 Configuration > TFT100 Bluetooth settings

General functionality

size

General functionality configures Bluetooth to work in slave mode. This mode allows any external device to connect to TFT100.
Parameter BT Radio allows enabling or disabling Bluetooth. There are three different settings:

  • Disabled – Bluetooth functionality will be disabled.
  • Enable (hidden) – Bluetooth functionality will be enabled, external devices will be able to connect to TFT100, but no devices will be able to detect it.
  • Enable (visible) – Bluetooth functionality will be enabled and any external device will be able to detect and connect to TFT100.

It is possible to configure the Local name of the device, as well as the Local PIN, which will be used when trying to pair with the TFT100 device. There are two different parameters:

  • Local Name parameter lets user declare a visible name of TFT100 to external devices.
  • Local PIN parameter lets user configure Bluetooth PIN of TFT100 device.

The TFT100 supports composed Bluetooth Local names, which allows the user to have a predefined number of IMEI digits at the end of the device name. The format of the composed Bluetooth name looks like this:

Device name + %imeiX

X - how many digits will be taken from IMEI to show in Local name, digits will be taken from the end of IMEI. Minimum value of X is 1 and the Maximum value is 15.

Example:
If the configured Local Name parameter is "TFT100_%imei7" and the IMEI of the device is 352093089520901, name will be displayed as TFT100_9520901 (whether "_LE" is added at the end depends on whether device supports BLE or not. The full name of the device, which supports BLE would be TFT100_9520901_LE).
If the Local Name is written incorrectly, the Bluetooth name of the device will be broadcasted as it is. An example can be seen below.

Example:
If the configured Local Name parameter is "TFT100_%ime7" devices name will be broadcasted as TFT100_%ime7 or if wrong X will be configured, for example "TFT100_%imei20" devices name will broadcasted as TFT100_%imei20.

Bw nb.png The Composed Bluetooth name is supported from 03.25.05 firmware version.


TFT100 Bluetooth has several different Security Modes:

  • PIN only – only Local PIN will be reacquired to complete connection to TFT100.
  • PIN + MAC list – PIN and Authorized Devices MAC List will be checked against to allow connection to TFT100. If the external device MAC ID is in the list and correct Local PIN is entered then connection will be established, otherwise TFT100 will reject connection.
  • MAC list only – only Authorized Devices MAC List will be checked when trying to connect to TFT100. If external device MAC ID is in the list then connection will be established, otherwise TFT100 will reject connection.
  • None – neither Local PIN nor Authorized Device MAC List will be checked.

Auto Connect to External Device

Auto connection functionality configures TFT100 as master device, which allows connecting TFT100 to an external device. TFT100 currently supports these modes:

  • None – disables auto connection functionality.
  • Data Link – BT Data link mode is enabled by Configurator Data Link parameter: when Data Link is configured and TFT100 has a link with the server, paired device can send messages via Bluetooth SPP profile directly to the server. Messages will be encoded by Codec12.
Bw nb.png TFT100 supports ONE connection at a time.
TFT100 can see up to 10 available devices. If there are more than 10 devices, the list may change with each new scan.

External Name parameter works as a substring, which allows user to enter a part of the full external device name. For example, if external device name is "HandsFreeHeadset" and user enters "HandsFree" in External Name parameter window, then TFT100 will be allowed to connect to an external device named "HandsFreeHeadset".

Bluetooth solutions