Summary[edit | edit source]
The Mobile page is used for setting parameters related to the mobile data connection. This page is an overview of the Mobile section for TRB142 gateways.
The information in this page is updated in accordance with the TRB1420_R_00.01.05 firmware version.
Mobile configuration options[edit | edit source]
The Mobile configuration options section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
|Mode||NAT | Bridge*; default: NAT||Mobile connection operating mode.
|PIN number||string; default: none||A 4-digit long numeric password used to authenticate the modem to the SIM card.|
|APN||string; default: none||An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a public IP address) depending on the contract.
An APN Network Identifier cannot start with any of the following strings:
|Auth mode||CHAP | PAP | None; default: None||Authentication method that your GSM carrier uses to authenticate new connections on its network. If you select PAP or CHAP, you will also be required to enter a username and password.|
|Use Mobile operator DNS||off | on; default: on||When enabled, the mobile data connection uses DNS servers advertised by the ISP. If turned to 'off', requires you to enter a custom DNS server address instead.|
|Deny data roaming||off | on; default: off||When enabled, this option prevents the device from establishing a mobile data connection while not in your home network (roaming conditions).|