Summary[edit | edit source]
Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched, variable-latency data networks. This chapter is an overview of the NTP section for TRB142 devices.
The information in this page is updated in accordance with the TRB1420_R_00.01.05 firmware version.
Time Synchronization[edit | edit source]
The Time Synchronization section is used to set the device's time zone setting. The figure below is an example of the Time Synchronization section:
NTP Settings[edit | edit source]
The NTP Settings section is used to turn NTP on or off, select used time servers and make the device a time server:
|Enable NTP client||off | on; default: on||Turns NTP on or off.|
|Provide NTP server||off | on; default: off||When turned on, the device will also act as an NTP Server, providing clock synchronization to other devices in the network.|
|NTP server candidantes||ip | host; default: 0.pool.ntp.org||Time servers used by the device to synchronize time.|