FMB630 K-Line Data

From Wiki Knowledge Base | Teltonika
Revision as of 14:34, 30 April 2019 by Mantas.sestokas (talk | contribs)$7

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Main Page > Fleet management > FMB630 > FMB630 Advanced Configuration > FMB630 K-Line Data

K-Line Data functionality allows user to monitor and use incoming data from Tachograph via K-line. Kline periodic record timeout parameter is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as separate packet.

To configure any K-Line parameter, every parameter should be separated with comma. For example, configuring first profile Kline Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID do not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.


Kline tab.png

K-Line front panel supported with Firmware version 00.02.xx[edit]

External links[edit]

https://wiki.teltonika.lt/view/FM63_firmware_errata
https://wiki.teltonika.lt/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution