Difference between revisions of "Template:FMB630 K-Line Data"

From Wiki Knowledge Base | Teltonika
Jump to: navigation, search
(K-Line front panel supported with Firmware version 00.02.77 or lower)
(One intermediate revision by the same member not shown)
Line 13: Line 13:
  
 
===K-Line front panel supported with Firmware version 00.02.77 or lower===
 
===K-Line front panel supported with Firmware version 00.02.77 or lower===
 +
 +
==External links==
 +
https://wiki.teltonika.lt/view/FM63_firmware_errata<br />
 +
https://wiki.teltonika.lt/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution <br />

Revision as of 15:53, 12 July 2019

K-Line Data functionality allows user to monitor and use incoming data from Tachograph via K-line. Kline periodic record timeout parameter is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as separate packet.

To configure any K-Line parameter, every parameter should be separated with comma. For example, configuring first profile Kline Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID do not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.


Kline tab.png

K-Line front panel supported with Firmware version 00.02.77 or lower

External links

https://wiki.teltonika.lt/view/FM63_firmware_errata
https://wiki.teltonika.lt/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution