Difference between revisions of "Blue ID"

From Wiki Knowledge Base | Teltonika
Line 42: Line 42:
 
<p><p> An example can be seen in the figure below.
 
<p><p> An example can be seen in the figure below.
  
[[Image:BeaconList_Configured.png|center]]
+
[[Image:BeaconList_Configured.png|center|800px]]

Revision as of 10:50, 22 January 2020

Blue Coin ID

Blue ID description

The Blue ID works as a beacon, which can allow users to track and identify trucks, tippers and containers on industrial sites using Bluetooth. This BLE sensor constantly broadcasts its own ID, which can be detected by FMB devices, which have beacon support.

Technical Data

  • Battery: Lifecycle up to 5 years
  • Bluetooth: 2,4 GHz - Bluetooth Low Energy 4.0/4.2
  • NFC: Supported
  • Dimensions: ø 36 mm base - Thickness 10 mm - 2 mounting ø 3 mm holes, spaced of 32 mm
  • Weight: 11 g
  • Operating temperature: -30°C to +70°C
  • Ingress Protection Rating: IP68 (Waterproof)
  • Transmission range: Up to 200 meters (open field)
  • Transmission period: 0,1 to 10 second (programmable)
  • Regulatory:
    • CE (Europe)*: EN 300 328/ EN 301 489 & EN 55032 / EN 62368-1
    • FCC (USA)*: FCC 15.247 / FCC PT 15B
    • ISED/IC (Canada)*: RSS-247 / ICES-003
    • RoHS certified

(*) Certification in progress


Using Blue ID with Teltonika FMB1 devices

1. Connect the device to the configurator and go to Bluetooth settings. Make sure that BT Radio is set to Enable (visible) or Enable (hidden)

BTRadio Enable.png

2. Go to Beacon List, set Beacon Detection to All or Configured. When using configured, the beacon information will have to be entered in order for the device to be able to detect the beacon. Beacon information should be entered in this format:

IBeacon:

UUID:Major:Minor

Eddystone:

Namespace:Instance ID

An example can be seen in the figure below.

BeaconList Configured.png