RMS - Alerts menu

From Wiki Knowledge Base | Teltonika
Revision as of 10:04, 8 July 2019 by RytisB (talk | contribs) (→‎Summary)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Main Page > Network products > RMS > RMS Manual > RMS - Management tab > RMS - Alerts menu

Summary[edit | edit source]

The Alerts top control menu located in the Management menu tab. Can be used to set up alerts the user receive via email when a specific event occurs (signal strength changes, SIM switch occurs, mobile data limit is reached, etc.). This section of the RMS user manual provides an overview of the functions of the Alerts menu.

Create alert[edit | edit source]

The Create alert is used to set up alerts for the specific device(s) in the RMS. To create alert(s) go to Left sidebar panel (Management → Overview) and click on Overview submenu.

Move your mouse pointer to the Top control Alerts menu and select Create alerts (Alerts → Create alert).

RMS-device-menu-left-sidebar-panel.jpg RMS-top-menu-alerts-create-alert.png

The Create alert function is used to set up a new custom alert event for a specified device(s).


RMS-create-alert.gif


Instructions[edit | edit source]


  1. Select the device(s) for which you want to create alert(s).
  2. Move your mouse pointer to the top control Alerts menu and select Create alert.
  3. A pop-up window with alert event, event subtype and other information for selected device(s) will appear.
  4. Fill out and select the appropriate fields in the window and click the Save button.
  5. A new pop-up showing alert status for that device will appear. If successful you will get Device alert created successfully in the Status column.

RMS-device-alert-created-successfully.jpg

Important!

Currently you can set up even more, different types of alerts in the router's WebUI by visiting the "Events Reporting" page (Status → Events Log → Events Reporting.)

Device alerts[edit | edit source]

The Device alerts purpose is manage alerts that were created for selected device(s) in the RMS. To manage alert(s) go to Left sidebar panel (Management → Overview) and click on Overview submenu.

Move your mouse pointer to the Top control Alerts menu and select Device alerts (Devices → Create alerts).

RMS-device-menu-left-sidebar-panel.jpg RMS-top-menu-alerts-device-alerts.png

To manage alert(s) for a selected device simply follow the steps below:


RMS-device-alerts.gif


The Device alerts function is used to view and delete already existing alerts on a device(s).

Instructions[edit | edit source]


  1. Select the device for which you want to manage alert(s).
  2. Move your mouse pointer to the top control Alerts menu and select Device alerts.
  3. A pop-up window listing alerts for the selected device(s) will appear.

RMS-alert-configurations.png

Delete device alert[edit | edit source]


  1. Select the device for which you want to manage alert(s).
  2. Move your mouse pointer to the top control Alerts menu and select Device alerts.
  3. A pop-up window will be shown a list of alerts existing in the selected device(s).
  4. You can delete alerts by clicking theRMS-trash-icon-2.pngsymbol located next to each alert.
  5. In the next window you will get a Remove alert configuration confirmation message. Click Yes to proceed.
  6. After the deletion is complete in the Status column you will get a message: Device alert was removed successfully.

Rms-device-alert-was-removed-successfully.png

To delete an alert for a selected device simply follow a tutorial below:


RMS-delete-device-alert.gif