RMS Files: FW files

From Wiki Knowledge Base | Teltonika
Revision as of 11:43, 18 May 2018 by Dziugas (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Summary[edit | edit source]

The FW files section located in the Files menu tab can be used to upload firmware files to RMS. You can upload a maximum of 10 firmware files. This section of the RMS user manual provides an overview on the functions of the FW files section.

Uploading firmware files[edit | edit source]


To upload a firmware file go to the RMS web page, Left sidebar panel, Files tab and click on Firmware submenu.


RMS-files-firmware-left-sidebar-panel.jpg RMS Firmware Upload.gif


  1. Scroll your mouse pointer to the Top control Files menu (Files → Add new).
  2. Click Add file button, select the config file that you wish to add from your computer.
  3. (Optional) you can enter a short description for your firmware file.
  4. Click Upload if successful your file will appear in the top of the Firmware table.

At the top of your screen, you will get a notification in green text: File uploaded.



Downloading firmware files[edit | edit source]

To upload a firmware file, you must first obtain one. You can download firmware for different RUT devices from these links:

Deleting firmware files[edit | edit source]


  1. To remove a firmware file(s) go to the RMS web page, Left sidebar panel, Files tab and click on Firmware submenu.
  2. Select firmware(s) that you wish to remove (you can remove multiple firmware at once).
  3. Scroll your mouse pointer to the Top control Files menu (Files → Remove).
  4. You will be prompted with a confirmation pop-up. Click "Yes" if you wish to remove the selected firmware(s).


At the top of your screen, you will get a notification in green text: File deleted. The removed configuration(s) will no longer be visible in the Firmware table.


RMS Firmware Remove.gif