RUTX09 SIM card

From Wiki Knowledge Base | Teltonika
Revision as of 12:57, 27 February 2019 by Dziugas (talk | contribs) (Protected "RUTX09 SIM card" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > Network products > RUTX09 > RUTX09 Manual > RUTX09 SIM card

This chapter provides a description on how to correctly insert a SIM card into a RUTX09 router:

SIM card insertion
Rutx09 sim card insertion v1.jpg
1 Pull the SIM needle out of the router
2 Push the SIM holder button(s) with the SIM needle
3 Pull out the SIM holder(s)
4 Insert your SIM card(s) into the SIM holder(s)
5 Slide the SIM holder(s) back into the router

The device is compatible with mini-SIM (2FF) size cards. But since different types of SIM cards have the same contact arrangement, smaller SIM cards can also be used with the router, provided they are inserted into a 2FF SIM card adapter. A size perspective of the most popular SIM card types can be seen in the figure below:

Sim card types v3.png

Micro-SIM (3FF) cards can be used with a 3FF to 2FF SIM card adapter such as this one:

3ff to 2ff sim card adapter v2.png

Nano-SIM (4FF) cards can be used with a 4FF to 2FF SIM card adapter such as this one:

4ff to 2ff sim card adapter v2.png

The measurements of the different SIM card types are as follows:

SIM card format Length (mm) Width (mm) Thickness (mm)
Mini-SIM (2FF) 25.00 15.00 0.76
Micro-SIM (3FF) 15.00 12.00 0.76
Nano-SIM (4FF) 12.30 8.80 0.67