Telenor cloud connection

From Wiki Knowledge Base | Teltonika
Revision as of 14:51, 27 February 2019 by Dziugas (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Telenor is a Managed IoT Cloud (MIC) - a secure cloud platform for device and data management that generates valuable and useful insights about your connected products. It provides the building blocks you need to connect your product, collect and store all product data, and extract value and insights from that data.

Introduction[edit | edit source]

This article contains step-by-step instructions on how to connect and configure a RUT9xx series router to the Telenor cloud.

Prerequisites[edit | edit source]

You will need:

  • A router from the RUT9xx series
  • A Telenor account

Adding and configuring a device[edit | edit source]

  • Login to your Telenor account. Click the New Thing Type button located on the left side of the screen:
    Telenor 1.png

  • Create a custom Label, Description and select your Domain name. Click Save:
    Telenor 2.png

  • Click on the newly created Thing Type and add a new "Thing":
    Telenor 3.png

  • Fill out the following form. Make sure the switch next to the Batch field is flipped ON (Telenor switch.png) as this will generate the certificates necessary to connect your router to Telenor. Click Create:
    Telenor 4.png

  • The newly create batch should be visible in the Thing Credentials table. Click the download button (Telenor download button.png) to get your certificates:
    Telenor 5.png

  • Login to the router's WebUI and go to the Services → Telenor MQTT page. Configure Telenor MQTT:
    • Host and Port fields should be filled out with information provided by Telenor
    • Thing Name field value should match the folder name found inside the downloaded batch archive
    • Certificate Authority (CA) file should be provided by Telenor
    • Client certificate and key files can be found in the downloaded batch archive
    Telenor 6 v2.png

Creating rules[edit | edit source]

For this example, we'll create a rule that turns the router's relay output ON when the signal strength fall below -70 dBm.


  • Login to the router's WebUI and go to the Services → Telenor MQTT page. Check the Receive messages field and come up with a custom Setting Value:
    Telenor 12.png

  • Login to your Telenor account. Click the Settings button located on the top-right side of the screen, next to your account name. Select the Rules box in the menu on the left and click + New Rule:
    Telenor 7.png

  • Name and describe your rule, select your Domain and the Thing Type to which the rule will be assigned. Click Next to continue:
    Telenor 8.png

  • The When, And and Then sections indicate the conditions under which a certain specified action will occur. When you have set these conditions, Click Next to continue:
    Telenor 9.png

  • Add a New Action. Specify it to Set resource and enter the setting and its value to change (for our example this will be relay set to 1). Click Add to create the rule:
    Telenor 10.png

  • The rule will appear in the Rules table. Make sure it is turned ON (Telenor switch.png):
    Telenor 11.png