Difference between revisions of "Template:Networking rutx manual setup wizard wifi"

From Wiki Knowledge Base | Teltonika
 
Line 42: Line 42:
 
     </tr></table>
 
     </tr></table>
  
If you wish to set the router's WiFi settings later instead, you can do so via the <i>Network → [[{{{name}}}<nowiki> Wireless|Wireless]]</nowiki></i> page.
+
If you wish to set the router's WiFi settings later instead, you can do so via the <i>Network → [[{{{name}}} Wireless|Wireless]]</i> page.

Latest revision as of 14:08, 20 January 2020

WiFi[edit | edit source]

The WiFi section is used to configure the router's WiFi access points (APs). The router supports two types of WiFi: 2.4 GHz and 5 GHz. 2.4 GHz WiFi provides better coverage and works at a longer range, but has lower data transfer speeds when compared to 5 GHz WiFi.

[[File:{{{file_wifi}}}]]

Field Value Description
Enable off | on; default: on Turns the WiFi access point on or off.
Channel WiFi channel number | auto; default: auto WiFi channel used by the access point. When this field is set to 'auto', the access point will choose the least populated channel.
ESSID string; default: RUT_<last 4 symbols of WiFi MAC>_<frequency> The Extended Service Set Identifier (ESSID) is an identification string (name) for the access point. It is how the access point will be seen by connecting devices.
Encryption No encryption | WPA-PSK | WPA2-PSK | WPA-PSK/WPA2-PSK Mixed Mode | WPA-EAP | WPA2-EAP; default: WPA2-PSK The type of encryption used by the access point.
Cipher auto | Force CCMP (AES) | Force TKIP | Force TKIP and CCMP (AES); default: Force TKIP and CCMP (AES) An algorithm for performing encryption and decryption.
Key string; default: unique to each device A password used to authenticate users to the access point.

If you wish to set the router's WiFi settings later instead, you can do so via the Network → [[{{{name}}} Wireless|Wireless]] page.