Open main menu

ThingWorx

This is the approved revision of this page, as well as being the most recent.
Tttwx.png

Contents

DescriptionEdit

ThingWorx is the industry-leading industrial innovation platform that is designed to rapidly deliver IoT applications and Augmented Reality (AR) experiences that unlock the value of the converged digital and physical worlds.

SummaryEdit

The example application, written by Teltonika, streams information from the router. Once the service is enabled, you should be able to view the following information in your ThingWorx server

  • WAN Type
  • WAN IP
  • Mobile Operator Name
  • Mobile Signal Strength
  • Mobile Network Type

This information is sent to your ThingWorx server continuously, at a specified (default - 5 seconds) interval.

Launching the ThingWorx serverEdit

In order to receive information from the router, you will need a ThingWorx server to act an end-point. In order to get the server up and running, you will first need to create an account here: https://developer.thingworx.com/en/signup

After signing-up, you have to confirm your e-mail address to be able to use their products.

After a successful registration you should be automatically logged-in and redirected to: https://developer.thingworx.com/en

Here you can find a free evaluation trial for 30 days. Start your hosted trial and launch the ThingWorx server. The server should start-up in a couple of minutes.

After the server starts, you will be given information about the servers hostname. This is important, so make sure you save this information. Alternatively, you can always go back to it later.

Press 'Launch' to enter into the ThingWorx composer. You have now successfully launched your ThingWorx server.

Generating application keyEdit

For the server to be able to connect to the router and retrieve information, an application key is required. This section will explain how to generate this application key in the ThingWorx Composer.

You must generate at least one application key, although it is recommended to use different keys for each device, which will be connected to ThingWorx IoT platform. ThingWorx server must be running and you should be in ThingWorx Composer page. If it is not the case, please repeat server start up steps.

When in the ThingWorx Composer page, on the left of the screen locate the 'Browse' section and click on it.

The scroll bar should now change to a list containing various objects you can add. Navigate down to the 'Security' section and click on 'Application Keys'.

In the main window, you will now see a list of available application keys. You need to create a new one, so click 'New' and fill in the required fields.

The name field has to be unique (eg. RouterThing), for testing, in the 'User name reference' field input 'Administrator' (a user that already exists) and set the expiration date to anything you like.

Creating a ThingEdit

Now you will create a Thing for our ThingWorx example application, which contains these properties:

  • WAN Type
  • WAN IP
  • Mobile Operator Name
  • Mobile Signal Strength
  • Mobile Network Type

ThingWorx server must be running and you should be in ThingWorx Composer page. If it is not the case, please repeat server start up steps in 1).

In ThingWorx Composer page, on the main menu, click on „Modeling“ tab and then on „Things“. Similar to Application Key generation, you should see here a list of Things and modify them.

 

To add a new Thing, click on the green plus icon with a name „New“ and now you should be in adifferent page, see below:

 

Once again, there are many fields in here, but only a few are required for our example application. The required ones are: Name and Thing Template.

Name must be unique. You can write something like: „RouterThing“. In the Thing Template select „RemoteThing“ option.

 

Note 1: One thing per device. This means that if you have multiple devices of the same model, you would need to create a multiple things with different names.

Note 2: Remember Thing’s name, because you will need it later.

Once required fields are set, you can click „Save“ and you should be redirected to newly created Thing information page:

 

Now you need to create streaming properties for this thing. To view properties, click on the „Properties“ while being in Thing information page.

 

First, you need to enable edit mode, so press that orange „Edit“ button.

 

Now you can see that there are more options. To create a new property, click on the „Add My Property“ button with a green plus icon.

 

There are many additional fields, but only a few are required for our example: Name, Base Type and Aspects.

Below you can see table with these fields, so create each field with such info:

 

Main parameters:

  • Persistent – if this option is used, once device is disconnected, property’s value will be set as default. If default value was not specified, value will be set as empty.
  • Read-only – this property is read only.
  • Logged – should be used when property’s value is updated from the device everytime, at some interval.

See below:

 

After required fields are set, click on “Done and Add” icon and repeat till all 5 properties are created.

 

Once all properties are created, press “Save” to save changes.

Preparing firmware with example applicationEdit

First, you need to obtain GPL package from https://teltonika.lt/gpl.

Then you need to obtain the ThingWorx C-SDK source code from: https://marketplace.ptc.com/apps/193540/c-sdk

You need to download C-SDK version 2.2.1.1321.

After downloading the C-SDK, extract everything inside the archive folder into '<GPL-PACKAGE-FOLDER-PATH>/package/libtwCSdk/src/'.

Now you need to run “make menuconfig” command inside GPL package folder.

 

Now do the same with “Luci” section, “Applications → luci-app-iot”. This will enable to configure example package from router control panel, see below for example:

 

Everything should be ready and you can save and exit.

Now run “make” command and firmware will appear in “bin/ar71xx/tltFws” directory. You can flash “GPL_…._WEBUI.bin” file.

Configuring and launching example applicationEdit

After you successfully built and flashed firmware, in „Services“ tab there should be an option called „IoT Platforms“.

 

All of the shown fields are required. Explanation of each field:

  • Server Address – ThingWorx main server IP address. For example: „PP-0803200705RN.Devportal.Ptc.Io“.
  • Server Port – ThingWorx main server port. It is recommended to use SSL, which is automatically used with „443“ port.
  • Thing Name – Thing name, which was created in ThingWorx Composer. In this example it is „RouterThing“.
  • Application Key – Application key for this ThingWorx application. It was generated in step 2). so copy it from there.

Also click „Enable“ to enable example application.

See below:

 

Now click „Save“ and if everything is correct – example application will successfully connect to ThingWorx main server.

This is the last, but important step. You need to add bindings to Thing’s properties. Open ThingWorx Composer control panel and select a Thing (in example it is „RouterThing“) and navigate to „Properties“ page. Enable editing mode by clicking orange „Edit“ button.

Tip: If device is connected, in „Properties“ window, down below „RemoteThing“, property „isConnected“ will be set as true. This can be used to know if device is connected.

 

Now click on „Manage Bindings“ button. A new window should show up:

 

Now click on „Remote“ tab and you should be able to see all properties from your device:

 

Now by using drag’n’drop principle, drag each remote property (left side) to the right side in the right one „Source/Remote Name“:

 

Now do this for every property:

 

and click „Done“ and then „Save“. Everything should be ready, after a couple of seconds, data from the device should be updated. Click refresh button on „Value“ field to see the changes.

 

Explanation of example application's streaming methodsEdit

Example application is in „GPL/package/twStreamApp“ directory. Source code is inside „src“ directory.

The main logic happens in „StreamThing.c“ file. A few main methods:

CreateSteamSensorThing – Create a Thing destroySteamSensorThing – Destroy a Thing onSteamSensorProcessScanRequest – Update Thing properties at some interval

First of all, Thing must be created. This is done inside CreateSteamSensorThing method with a TW_MAKE_THING function:

TW_MAKE_THING(thingName, TW_THING_TEMPLATE_GENERIC);

Now each property must be defined below, with TW_PROPERTY function:

TW_PROPERTY("WAN_Type", TW_NO_DESCRIPTION, TW_STRING);

TW_STRING – can be TW_NUMBER, TW_BOOLEAN and etc.

If property includes aspects(persistent, readonly, logged) those are also needs to be defined. These aspects are defined with TW_ADD_BOOLEAN_ASPECT function:

TW_ADD_BOOLEAN_ASPECT("WAN_Type", TW_ASPECT_ISREADONLY, TRUE); TW_ADD_BOOLEAN_ASPECT("WAN_Type", TW_ASPECT_ISLOGGED, TRUE);

Complete property definition could look like:

TW_PROPERTY("WAN_Type", TW_NO_DESCRIPTION, TW_STRING); TW_ADD_BOOLEAN_ASPECT("WAN_Type", TW_ASPECT_ISREADONLY, TRUE); TW_ADD_BOOLEAN_ASPECT("WAN_Type", TW_ASPECT_ISLOGGED, TRUE);

Since properties are defined, now you need to update them. You can do this inside onSteamSensorProcessScanRequest function with TW_SET_PROPERTY method:

TW_SET_PROPERTY(thingName, "WAN_Type", TW_MAKE_STRING("someWANTypeName"));

Value should be used with TW_MAKE_STRING; TW_MAKE_NUMBER methods, depending on value’s data type.

However, if value should not be updated everytime, you can use TW_SET_PROPERTY in CreateSteamSensorThing function, right after defining properties.

As you can see, example application contains the same properties as our Thing in ThingWorx Composer.

External LinksEdit

https://developer.thingworx.com/resources/guides/c-sdk-reference

Disclaimer:

Any of the trademarks, service marks, collective marks, design rights or similar rights that are mentioned, used or cited in the articles are the property of their respective owners.