Noip.com DDNS configuration

From Wiki Knowledge Base | Teltonika
This is the approved revision of this page, as well as being the most recent.

Summary[edit | edit source]

This chapter is a guide on configuring a noip.com provider DDNS instance on RUT routers.

Preconditions[edit | edit source]

There is one mandatory precondition for DDNS to work - you must have a Static or Dynamic Public IP address. Dynamic DNS will not work with a Shared Public IP. You can read up more on this in our article on Private and Public IP Addresses.

The easiest way to find out this information is to log in to the router's WebUI and check the WAN widget in the Overview page. You will be automatically redirected to the Overview page after you log in and the WAN widget will be on the right side of the page, second widget from the top. If the WAN widget displays a Public IP address, your DDNS configuration should work; if it displays a Private IP address, that means you're using a Shared Public IP address and you won't be able to reach your router with the help of DDNS.

Private vs public ip.png

Step 1: noip.com configuration[edit | edit source]

First thing we need to do is to visit the website of our system. You can access the website by entering www.noip.com/login in your internet browser's URL bar.

Login screen[edit | edit source]


We need to login into noip.com system using our credentials. If you don't have a registered account then you need to create one. You can do that by clicking register.

NoipLoginscreen.png

Create host[edit | edit source]


In the opened browser window, enter the name of the host and click Add Hostname

Hostcreate.png

List of hosts[edit | edit source]


You can preview the list of hosts you have created by clicking the button Active

Active.png



Example of list

Hostlist2.png

Step 2: Router configuration[edit | edit source]

Now we need to open our RUT homepage. You can access the website by entering 192.168.1.1 in your internet browser's URL bar.

Open the DDNS configuration panel by clicking Services → Dynamic DNS

Mainrouter.png

DDNS configuration name[edit | edit source]


Type in your DDNS configuration name and click Add new

AddDDNS2.png

Click the Edit button to edit your DDNS instance configuration

DDNSedit.png

Configuration settings[edit | edit source]


Check the Enable box

Choose the noip.com service

Type your hostname, username, password and click Save

Setup2.png

Step 3: Try your DDNS[edit | edit source]

Status[edit | edit source]

Wait up to 5 minutes from the time you saved the changes.

In the Status column, you can see when the last time the DDNS was updated.

Status.png

Enable remote HTTP access[edit | edit source]

Open Administration page by clicking System → Administration

OpenAdministrationPanel.png

Click Access Control

Clickaccess.png

Check Enable remote HTTP access box and click Save

HttpEnable.png

Connect to your host[edit | edit source]

Try to access the host by entering your hostname in your internet browser's URL bar.

Successs.png

See also[edit | edit source]

Dynamic DNS - general information on the DDNS service.

DDNS Configuration Examples - additional examples for different DDNS providers.

External links[edit | edit source]

https://www.noip.com