RUTX11 SNMP

From Wiki Knowledge Base | Teltonika
Main Page > Network products > RUTX11 > RUTX11 Manual > RUTX11 WebUI > RUTX11 SNMP

Summary

Simple Network Management Protocol (SNMP) is a popular protocol for network management. It is used for collecting information, and configuring, network devices. This section is an overview of the SNMP function in RUTX routers.

MIB file download

FIELD ROUTER MIB FILE
RUTXxx TLT-MIB_RUTXxx

SNMP

SNMP settings


SNMP agent settings


Networking rutx manual snmp agent settings v1.png

field namevaluedescription
Enable SNMP serviceoff | on; Default: offRun SNMP service on system's startup
Enable remote accessoff | on; Default: offOpen port in firewall so that SNMP service may be reached from WAN
ProtocolUDP | TCP; Default: UDPSNMP service's protocol
PortDefault: 161SNMP service's port
SNMP v1 Modeoff | on; Default: onEnable/disable SNMP v1 Mode
SNMP v2c Modeoff | on; Default: onEnable/disable SNMP v2c Mode
SNMP v3 Modeoff | on; Default: offEnable/disable SNMP v3 Mode

SNMP system summary


Networking rutx manual snmp system summary v1.png

field namevaluedescription
MIB file-Downloads Teltonika's MIB file
System OID -OID or Object Identifier, is an identifier used to name and point to an object in the MIB hierarchy
LocationDefault: locationTrap named sysLocation
ContactDefault: email@example.comTrap named sysContact
NameDefault: nameTrap named sysName

SNMP v3 users


SNMP users


In this section you can create SNMP v3 users. You can do that by simply writing a name and pressing Add button.

Networking rutx manual snmp users v1.png

You can access SNMP user settings by pressing Edit user button.

Networking rutx manual snmp user edit v1.png

field namevaluedescription
Enable off | on; Default: offEnable/disable user
UsernameDefault: ""Set username to access SNMP
Security levelDefault: No authentication, no privacySelect what security level you desire. Available options:
  • No authentication, no privacy
  • Authentication, no privacy
  • Authentication and privacy
Access ModeDefault: Read-OnlySelect what access mode you desire. Available options:
  • Read-Only
  • Read-Write
MIB subtreeDefault: .1Leave empty to access full MIB tree

Communities


SNMP community


In SNMP community page you can manage access rights.

Networking rutx manual snmp community v1.png

You can access SNMP community settings by pressing Edit button.

Networking rutx manual snmp community edit v1.png

field namevaluedescription
Community nameDefault: ""Set community name
IP AddressDefault: ""Set community IP address
IP MaskDefault: ""

Set community IP mask

Access ModeDefault: Read-OnlySelect what access mode you desire. Available options:
  • Read-Only
  • Read-Write

Trap settings


Trap service settings


SNMP Traps are used to send alert messages to a central collector, the “SNMP manager” when an important event happens. A benefit of using Traps for reporting alarms is that they trigger instantaneously, rather than waiting for a status request from the manager.

Networking rutx manual snmp trap service settings v1.png

field namevaluedescription
Host/IPDefault: ""Host to transfer SNMP traffic to
PortDefault: 162Port for trap's host
CommunityDefault: Community name

Trap rules


In Trap rules section you can create alerts and when those are triggered a message to “SNMP manager” will be sent.

Networking rutx manual snmp trap rules v1.png

You can edit Trap rule by pressing Edit button.

Networking rutx manual snmp trap rule edit v1.png

field namevaluedescription
Enableoff | on; Default: onEnable this rule
ActionDefault: Signal strength trapAlert type. Available options:
  • Signal strength trap
  • Connection type trap
  • Digital input trap
  • Digital output trap
Signal strengthDefault: ""GSM signal's strength value in dBm, e.g. -85

SNMP Variables list

NAME OID DESCRIPTION
ModemImei.0 .1.3.6.1.4.1.48690.1.1.0 Modem IMEI
ModemModel.0 .1.3.6.1.4.1.48690.1.2.0 Modem model
ModemManufacturer.0 .1.3.6.1.4.1.48690.1.3.0 Modem manufacturer
ModemRevision.0 .1.3.6.1.4.1.48690.1.4.0 Modem revision
ModemSerial.0 .1.3.6.1.4.1.48690.1.5.0 Modem serial number
Imsi.0 .1.3.6.1.4.1.48690.1.6.0 Modem IMSI
RouterName.0 .1.3.6.1.4.1.48690.1.7.0 Router's name
ProductCode.0 .1.3.6.1.4.1.48690.1.8.0 Router's Product code
BatchNumber.0 .1.3.6.1.4.1.48690.1.9.0 Router's batch number
HardwareRevision.0 .1.3.6.1.4.1.48690.1.10.0 Router's Hardware Revision number
SimState.0 .1.3.6.1.4.1.48690.2.1.0 SIM card status
PinState.0 .1.3.6.1.4.1.48690.2.2.0 PIN status
NetState.0 .1.3.6.1.4.1.48690.2.3.0 Mobile network registration status
Signal.0 .1.3.6.1.4.1.48690.2.4.0 Signal strength level
Operator.0 .1.3.6.1.4.1.48690.2.5.0 Operator currently in use
OperatorNumber.0 .1.3.6.1.4.1.48690.2.6.0 Operator number (MCC+MNC)
ConnectionState.0 .1.3.6.1.4.1.48690.2.7.0 Data session connection state
ConnectionType.0 .1.3.6.1.4.1.48690.2.8.0 Data session connection type
Temperature.0 .1.3.6.1.4.1.48690.2.9.0 Modem's temperature in 0.1 degrees Celsius
ReceivedToday.0 .1.3.6.1.4.1.48690.2.10.0 Tee current day's RX packet count
SentToday.0 .1.3.6.1.4.1.48690.2.11.0 The current day's TX packet count
ReceivedYesterday.0 .1.3.6.1.4.1.48690.2.12.0 Yesterday's RX packet count
SentYesterday.0 .1.3.6.1.4.1.48690.2.13.0 Yesterday's TX packet count
FirmwareVersion.0 .1.3.6.1.4.1.48690.2.14.0 Router's Firmware version
SimSlot.0 .1.3.6.1.4.1.48690.2.15.0 SIM slot currently in use
RouterUptime.0 .1.3.6.1.4.1.48690.2.16.0 Router up-time in seconds
ConnectionUptime.0 .1.3.6.1.4.1.48690.2.17.0 Mobile connection up-time in seconds
MobileIP.0 .1.3.6.1.4.1.48690.2.18.0 IP address of the mobile interface
Sent.0 .1.3.6.1.4.1.48690.2.19.0 The amount of data sent through the mobile interface
Received.0 .1.3.6.1.4.1.48690.2.20.0 The amount of data received through the mobile interface
CellID.0 .1.3.6.1.4.1.48690.2.21.0 ID of the current mobile operator's cell
SINR.0 .1.3.6.1.4.1.48690.2.22.0 SINR value in dB
RSRP.0 .1.3.6.1.4.1.48690.2.23.0 RSRP value in dBm
RSRQ.0 .1.3.6.1.4.1.48690.2.24.0 RSRQ value in dB
hotSpotId.0 .1.3.6.1.4.1.48690.3.4.1.0 Hotspot ID
hotSpotSsid.0 .1.3.6.1.4.1.48690.3.4.2.0 Hotspot SSID
hotSpotEnableState.0 .1.3.6.1.4.1.48690.3.4.3.0 Hotspot status (enabled or disabled)
hotSpotIP.0 .1.3.6.1.4.1.48690.3.4.4.0 Hotspot interface IP address
hotSpotDownloadBandWidth.0 .1.3.6.1.4.1.48690.3.4.5.0 Hotspot download bandwidth
hotSpotUploadBandWidth.0 .1.3.6.1.4.1.48690.3.4.6.0 Hotspot upload bandwidth
hotSpotUsers.0 .1.3.6.1.4.1.48690.3.4.7.0 Hotspot users list
hotSpotUsersPass.0 .1.3.6.1.4.1.48690.3.4.8.0 Hotspot users password list
hotSpotUsersActive.0 .1.3.6.1.4.1.48690.3.4.9.0 List of active Hotspot users
hotSpotUsersMac.0 .1.3.6.1.4.1.48690.3.4.10.0 Hotspot users MAC address list
hotSpotUsersIp.0 .1.3.6.1.4.1.48690.3.4.11.0 Hotspot users IP address list
hotSpotUsersStartTime.0 .1.3.6.1.4.1.48690.3.4.12.0 Hotspot users log in time list
hotSpotUsersUseTime.0 .1.3.6.1.4.1.48690.3.4.13.0 Hotspot users log in up-time list
hotSpotUsersDownload .0.1.3.6.1.4.1.48690.3.4.14.0 Hotspot users downloaded data count
hotSpotUsersUpload.0 .1.3.6.1.4.1.48690.3.4.15.0 Hotspot users uploaded data count
hotSpotEndTime.0 .1.3.6.1.4.1.48690.3.4.16.0 Hotspot
DigitalInput.0 .1.3.6.1.4.1.48690.5.1.0 Digital input state
DigitalIsolatedInput.0 .1.3.6.1.4.1.48690.5.2.0 Digital isolated input state
AnalogInput.0 .1.3.6.1.4.1.48690.5.3.0 Analog input state
DigitalOCOutput.0 .1.3.6.1.4.1.48690.5.4.0 Digital OC output state
DigitalRelayOutput.0 .1.3.6.1.4.1.48690.5.5.0 Digital Relay output state
AnalogInputCalc.0 .1.3.6.1.4.1.48690.5.6.0 Analog input value
Longtitude.0 .1.3.6.1.4.1.48690.6.1.0 GPS Longitude value
Latitude.0 .1.3.6.1.4.1.48690.6.2.0 GPS Latitude value
Accuracy.0 .1.3.6.1.4.1.48690.6.3.0 GPS coordinate accuracy
Datetime.0 .1.3.6.1.4.1.48690.6.4.0 GPS coordinate fix time
NumSatellites.0 .1.3.6.1.4.1.48690.6.5.0 Number of GPS satelites